File Manager

X7ROOT File Manager

Current Path: /usr/include/linux

📁 ..
📄 a.out.h(7.15 KB)
📄 acct.h(3.58 KB)
📄 adb.h(1.05 KB)
📄 adfs_fs.h(873 B)
📄 affs_hardblocks.h(1.45 KB)
📄 agpgart.h(3.83 KB)
📄 aio_abi.h(3.1 KB)
📄 apm_bios.h(3.46 KB)
📄 arcfb.h(150 B)
📄 atalk.h(960 B)
📄 atm.h(7.64 KB)
📄 atm_eni.h(585 B)
📄 atm_he.h(343 B)
📄 atm_idt77105.h(892 B)
📄 atm_nicstar.h(1.19 KB)
📄 atm_tcp.h(1.52 KB)
📄 atm_zatm.h(1.57 KB)
📄 atmapi.h(889 B)
📄 atmarp.h(1.2 KB)
📄 atmbr2684.h(3.13 KB)
📄 atmclip.h(513 B)
📄 atmdev.h(7.44 KB)
📄 atmioc.h(1.55 KB)
📄 atmlec.h(2.26 KB)
📄 atmmpc.h(4.07 KB)
📄 atmppp.h(576 B)
📄 atmsap.h(4.79 KB)
📄 atmsvc.h(1.75 KB)
📄 audit.h(18.03 KB)
📄 auto_fs.h(2.53 KB)
📄 auto_fs4.h(4.3 KB)
📄 auxvec.h(1.4 KB)
📄 ax25.h(2.7 KB)
📄 b1lli.h(1.62 KB)
📄 baycom.h(820 B)
📄 bfs_fs.h(1.79 KB)
📄 binfmts.h(565 B)
📄 blkpg.h(1.53 KB)
📄 blktrace_api.h(4.38 KB)
📄 bpf.h(22.04 KB)
📄 bpf_common.h(1.2 KB)
📄 bpf_perf_event.h(453 B)
📄 bpqether.h(952 B)
📄 bsg.h(2.37 KB)
📄 bt-bmc.h(508 B)
📄 btrfs.h(25.07 KB)
📁 byteorder
📁 caif
📁 can
📄 can.h(5.46 KB)
📄 capability.h(11.25 KB)
📄 capi.h(2.99 KB)
📄 cciss_defs.h(3.14 KB)
📄 cciss_ioctl.h(2.63 KB)
📄 cdrom.h(28.12 KB)
📄 cgroupstats.h(2.1 KB)
📄 chio.h(5.16 KB)
📄 cm4000_cs.h(1.68 KB)
📄 cn_proc.h(3.19 KB)
📄 coda.h(17.09 KB)
📄 coda_psdev.h(720 B)
📄 coff.h(12.12 KB)
📄 connector.h(2.14 KB)
📄 const.h(673 B)
📄 cramfs_fs.h(2.68 KB)
📄 cuda.h(842 B)
📄 cyclades.h(16.65 KB)
📄 cycx_cfm.h(2.86 KB)
📄 dcbnl.h(24.5 KB)
📄 dccp.h(6.22 KB)
📄 devlink.h(9.66 KB)
📄 dlm.h(2.43 KB)
📄 dlm_device.h(2.42 KB)
📄 dlm_netlink.h(1.04 KB)
📄 dlm_plock.h(831 B)
📄 dlmconstants.h(4.9 KB)
📄 dm-ioctl.h(10.55 KB)
📄 dm-log-userspace.h(14.82 KB)
📄 dn.h(4.42 KB)
📄 dqblk_xfs.h(8.72 KB)
📁 dvb
📄 edd.h(5.41 KB)
📄 efs_fs_sb.h(2.11 KB)
📄 elf-em.h(1.83 KB)
📄 elf-fdpic.h(1.04 KB)
📄 elf.h(12.69 KB)
📄 elfcore.h(2.86 KB)
📄 errno.h(23 B)
📄 errqueue.h(1.1 KB)
📄 ethtool.h(71.11 KB)
📄 eventpoll.h(1.76 KB)
📄 fadvise.h(779 B)
📄 falloc.h(2.72 KB)
📄 fanotify.h(3.52 KB)
📄 fb.h(16 KB)
📄 fcntl.h(2.16 KB)
📄 fd.h(11.31 KB)
📄 fdreg.h(5.23 KB)
📄 fib_rules.h(1.58 KB)
📄 fiemap.h(2.65 KB)
📄 filter.h(1.99 KB)
📄 firewire-cdev.h(42.86 KB)
📄 firewire-constants.h(3.16 KB)
📄 flat.h(2.04 KB)
📄 fou.h(617 B)
📄 fs.h(8.47 KB)
📄 fsl_hypervisor.h(7.05 KB)
📄 fuse.h(16.41 KB)
📄 futex.h(4.81 KB)
📄 gameport.h(834 B)
📄 gen_stats.h(1.5 KB)
📄 genetlink.h(1.82 KB)
📄 gfs2_ondisk.h(12 KB)
📄 gigaset_dev.h(1.35 KB)
📁 hdlc
📄 hdlc.h(574 B)
📄 hdlcdrv.h(2.78 KB)
📄 hdreg.h(22.11 KB)
📄 hid.h(1.79 KB)
📄 hiddev.h(6.13 KB)
📄 hidraw.h(1.41 KB)
📄 hpet.h(680 B)
📁 hsi
📄 hw_breakpoint.h(679 B)
📄 hyperv.h(10.22 KB)
📄 hysdn_if.h(1.29 KB)
📄 i2c-dev.h(2.37 KB)
📄 i2c.h(6.66 KB)
📄 i2o-dev.h(11.22 KB)
📄 i8k.h(1.4 KB)
📄 icmp.h(2.82 KB)
📄 icmpv6.h(3.82 KB)
📄 if.h(9.26 KB)
📄 if_addr.h(1.7 KB)
📄 if_addrlabel.h(658 B)
📄 if_alg.h(816 B)
📄 if_arcnet.h(3.63 KB)
📄 if_arp.h(6.3 KB)
📄 if_bonding.h(4.66 KB)
📄 if_bridge.h(6.46 KB)
📄 if_cablemodem.h(922 B)
📄 if_eql.h(1.26 KB)
📄 if_ether.h(7.25 KB)
📄 if_fc.h(1.63 KB)
📄 if_fddi.h(3.6 KB)
📄 if_frad.h(2.89 KB)
📄 if_hippi.h(4.07 KB)
📄 if_infiniband.h(1.13 KB)
📄 if_link.h(19.58 KB)
📄 if_ltalk.h(147 B)
📄 if_macsec.h(5.42 KB)
📄 if_packet.h(7.15 KB)
📄 if_phonet.h(361 B)
📄 if_plip.h(596 B)
📄 if_ppp.h(29 B)
📄 if_pppol2tp.h(3.18 KB)
📄 if_pppox.h(4.64 KB)
📄 if_slip.h(809 B)
📄 if_team.h(2.48 KB)
📄 if_tun.h(3.71 KB)
📄 if_tunnel.h(3.03 KB)
📄 if_vlan.h(1.69 KB)
📄 if_x25.h(817 B)
📄 ife.h(288 B)
📄 igmp.h(2.88 KB)
📁 iio
📄 in.h(9.36 KB)
📄 in6.h(6.97 KB)
📄 in_route.h(873 B)
📄 inet_diag.h(2.77 KB)
📄 inotify.h(2.85 KB)
📄 input.h(32.52 KB)
📄 ioctl.h(100 B)
📄 ip.h(3.47 KB)
📄 ip6_tunnel.h(1.67 KB)
📄 ip_vs.h(12.77 KB)
📄 ipc.h(1.99 KB)
📄 ipmi.h(14.63 KB)
📄 ipmi_msgdefs.h(3.21 KB)
📄 ipsec.h(884 B)
📄 ipv6.h(3.66 KB)
📄 ipv6_route.h(1.73 KB)
📄 ipx.h(1.79 KB)
📄 irda.h(7.31 KB)
📄 irqnr.h(104 B)
📁 isdn
📄 isdn.h(5.58 KB)
📄 isdn_divertif.h(1.11 KB)
📄 isdn_ppp.h(1.82 KB)
📄 isdnif.h(2.25 KB)
📄 iso_fs.h(6.29 KB)
📄 ivtv.h(2.89 KB)
📄 ivtvfb.h(1.12 KB)
📄 ixjuser.h(24.53 KB)
📄 jffs2.h(6.85 KB)
📄 joystick.h(3.5 KB)
📄 kd.h(6.04 KB)
📄 kdev_t.h(320 B)
📄 kernel-page-flags.h(788 B)
📄 kernel.h(375 B)
📄 kernelcapi.h(956 B)
📄 kexec.h(1.92 KB)
📄 keyboard.h(12.42 KB)
📄 keyctl.h(2.98 KB)
📄 kvm.h(33.89 KB)
📄 kvm_para.h(819 B)
📄 l2tp.h(4.98 KB)
📄 libc-compat.h(4.03 KB)
📄 limits.h(874 B)
📄 llc.h(2.98 KB)
📄 loop.h(2.31 KB)
📄 lp.h(3.72 KB)
📄 lwtunnel.h(839 B)
📄 magic.h(2.9 KB)
📄 major.h(4.48 KB)
📄 map_to_7segment.h(7.02 KB)
📄 matroxfb.h(1.37 KB)
📄 mdio.h(13.74 KB)
📄 media.h(3.5 KB)
📄 mei.h(4.62 KB)
📄 membarrier.h(7.71 KB)
📄 memfd.h(186 B)
📄 mempolicy.h(2.35 KB)
📄 meye.h(2.41 KB)
📄 mii.h(7.76 KB)
📄 minix_fs.h(2.01 KB)
📄 mman.h(230 B)
📁 mmc
📄 mmtimer.h(2.01 KB)
📄 mpls.h(1.33 KB)
📄 mqueue.h(2.01 KB)
📄 mroute.h(4.06 KB)
📄 mroute6.h(4.08 KB)
📄 msdos_fs.h(6.28 KB)
📄 msg.h(3.21 KB)
📄 mtio.h(7.92 KB)
📄 n_r3964.h(2.29 KB)
📄 nbd.h(2.34 KB)
📄 ncp.h(4.94 KB)
📄 ncp_fs.h(3.27 KB)
📄 ncp_mount.h(2.06 KB)
📄 ncp_no.h(651 B)
📄 ndctl.h(6.6 KB)
📄 neighbour.h(4.17 KB)
📄 net.h(1.97 KB)
📄 net_dropmon.h(1.07 KB)
📄 net_namespace.h(609 B)
📄 net_tstamp.h(4.06 KB)
📄 netconf.h(423 B)
📄 netdevice.h(1.46 KB)
📁 netfilter
📄 netfilter.h(1.6 KB)
📁 netfilter_arp
📄 netfilter_arp.h(380 B)
📁 netfilter_bridge
📄 netfilter_bridge.h(768 B)
📄 netfilter_decnet.h(1.83 KB)
📁 netfilter_ipv4
📄 netfilter_ipv4.h(2.02 KB)
📁 netfilter_ipv6
📄 netfilter_ipv6.h(2.04 KB)
📄 netlink.h(6.13 KB)
📄 netlink_diag.h(1005 B)
📄 netrom.h(744 B)
📄 nfc.h(7.72 KB)
📄 nfs.h(4.31 KB)
📄 nfs2.h(1.37 KB)
📄 nfs3.h(2.24 KB)
📄 nfs4.h(5.95 KB)
📄 nfs4_mount.h(1.83 KB)
📄 nfs_fs.h(1.51 KB)
📄 nfs_idmap.h(2.19 KB)
📄 nfs_mount.h(2.32 KB)
📄 nfsacl.h(605 B)
📁 nfsd
📄 nl80211.h(270.89 KB)
📄 nubus.h(8.17 KB)
📄 nvme_ioctl.h(1.55 KB)
📄 nvram.h(469 B)
📄 omap3isp.h(20.19 KB)
📄 omapfb.h(5.72 KB)
📄 oom.h(448 B)
📄 openvswitch.h(31.79 KB)
📄 packet_diag.h(1.5 KB)
📄 param.h(78 B)
📄 parport.h(3.56 KB)
📄 patchkey.h(829 B)
📄 pci.h(1.29 KB)
📄 pci_regs.h(50.79 KB)
📄 perf_event.h(31.96 KB)
📄 personality.h(1.99 KB)
📄 pfkeyv2.h(9.91 KB)
📄 pg.h(2.23 KB)
📄 phantom.h(1.55 KB)
📄 phonet.h(4.51 KB)
📄 pkt_cls.h(12.49 KB)
📄 pkt_sched.h(20.63 KB)
📄 pktcdvd.h(2.56 KB)
📄 pmu.h(5.13 KB)
📄 poll.h(22 B)
📄 posix_types.h(1.01 KB)
📄 ppdev.h(3.07 KB)
📄 ppp-comp.h(2.41 KB)
📄 ppp-ioctl.h(5.29 KB)
📄 ppp_defs.h(4.93 KB)
📄 pps.h(4.06 KB)
📄 prctl.h(6.75 KB)
📄 psample.h(735 B)
📄 ptp_clock.h(5.09 KB)
📄 ptrace.h(3.08 KB)
📄 qnx4_fs.h(2.21 KB)
📄 qnxtypes.h(561 B)
📄 quota.h(5.78 KB)
📄 radeonfb.h(297 B)
📁 raid
📄 random.h(1.2 KB)
📄 raw.h(302 B)
📄 rds.h(7.9 KB)
📄 reboot.h(1.25 KB)
📄 reiserfs_fs.h(712 B)
📄 reiserfs_xattr.h(470 B)
📄 resource.h(2.09 KB)
📄 rfkill.h(3.5 KB)
📄 romfs_fs.h(1.15 KB)
📄 rose.h(2.12 KB)
📄 route.h(2.21 KB)
📄 rtc.h(3.85 KB)
📄 rtnetlink.h(17.02 KB)
📄 scc.h(4.43 KB)
📄 sched.h(2.26 KB)
📄 screen_info.h(2.36 KB)
📄 sctp.h(29.53 KB)
📄 sdla.h(2.71 KB)
📄 seccomp.h(1.83 KB)
📄 securebits.h(2.58 KB)
📄 selinux_netlink.h(1.11 KB)
📄 sem.h(2.54 KB)
📄 serial.h(3.04 KB)
📄 serial_core.h(5.11 KB)
📄 serial_reg.h(15.66 KB)
📄 serio.h(1.81 KB)
📄 shm.h(2.19 KB)
📄 signal.h(171 B)
📄 signalfd.h(1.07 KB)
📄 snmp.h(12.42 KB)
📄 sock_diag.h(431 B)
📄 socket.h(738 B)
📄 sockios.h(5.83 KB)
📄 som.h(5.35 KB)
📄 sonet.h(2.17 KB)
📄 sonypi.h(5.12 KB)
📄 sound.h(1.15 KB)
📄 soundcard.h(44.96 KB)
📁 spi
📄 stat.h(1 KB)
📄 stddef.h(1 B)
📄 string.h(175 B)
📁 sunrpc
📄 suspend_ioctls.h(1.34 KB)
📄 swab.h(6.36 KB)
📄 synclink.h(8.71 KB)
📄 sysctl.h(25.46 KB)
📄 sysinfo.h(986 B)
📄 target_core_user.h(3.65 KB)
📄 taskstats.h(6.83 KB)
📁 tc_act
📁 tc_ematch
📄 tcp.h(5.93 KB)
📄 tcp_metrics.h(1.45 KB)
📄 telephony.h(8.84 KB)
📄 termios.h(443 B)
📄 time.h(1.54 KB)
📄 times.h(215 B)
📄 timex.h(6.17 KB)
📄 tiocl.h(1.63 KB)
📄 tipc.h(5.44 KB)
📄 tipc_config.h(14.1 KB)
📄 toshiba.h(1.24 KB)
📄 tty.h(1.33 KB)
📄 tty_flags.h(3.66 KB)
📄 types.h(1.4 KB)
📄 udf_fs_i.h(634 B)
📄 udp.h(1.28 KB)
📄 uhid.h(2.15 KB)
📄 uinput.h(5 KB)
📄 uio.h(668 B)
📄 ultrasound.h(4.39 KB)
📄 un.h(239 B)
📄 unistd.h(157 B)
📄 unix_diag.h(1.1 KB)
📁 usb
📄 usbdevice_fs.h(6.78 KB)
📄 userfaultfd.h(6.59 KB)
📄 utime.h(152 B)
📄 utsname.h(606 B)
📄 uuid.h(1.5 KB)
📄 uvcvideo.h(1.6 KB)
📄 v4l2-common.h(2.38 KB)
📄 v4l2-controls.h(37.34 KB)
📄 v4l2-dv-timings.h(25.75 KB)
📄 v4l2-mediabus.h(4.55 KB)
📄 v4l2-subdev.h(5.27 KB)
📄 version.h(332 B)
📄 veth.h(161 B)
📄 vfio.h(26.54 KB)
📄 vhost.h(7.13 KB)
📄 videodev2.h(67.36 KB)
📄 virtio_9p.h(1.99 KB)
📄 virtio_balloon.h(3.71 KB)
📄 virtio_blk.h(5.2 KB)
📄 virtio_config.h(3.34 KB)
📄 virtio_console.h(2.94 KB)
📄 virtio_gpu.h(8.23 KB)
📄 virtio_ids.h(2.32 KB)
📄 virtio_input.h(2.45 KB)
📄 virtio_net.h(9.5 KB)
📄 virtio_pci.h(6.63 KB)
📄 virtio_ring.h(6.18 KB)
📄 virtio_rng.h(265 B)
📄 virtio_scsi.h(5.13 KB)
📄 virtio_types.h(2.11 KB)
📄 virtio_vsock.h(3.01 KB)
📄 vm_sockets.h(5.13 KB)
📄 vsockmon.h(1.78 KB)
📄 vt.h(2.98 KB)
📄 vtpm_proxy.h(1.62 KB)
📄 wait.h(600 B)
📄 wanrouter.h(390 B)
📄 watchdog.h(2.22 KB)
📁 wimax
📄 wimax.h(8.17 KB)
📄 wireless.h(41.65 KB)
📄 wmi.h(1.84 KB)
📄 x25.h(3.42 KB)
📄 xattr.h(2.53 KB)
📄 xfrm.h(11 KB)

Editing: cyclades.h

/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $
 * linux/include/linux/cyclades.h
 *
 * This file was initially written by
 * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by
 * Ivan Passos <ivan@cyclades.com>.
 *
 * This file contains the general definitions for the cyclades.c driver
 *$Log: cyclades.h,v $
 *Revision 3.1  2002/01/29 11:36:16  henrique
 *added throttle field on struct cyclades_port to indicate whether the
 *port is throttled or not
 *
 *Revision 3.1  2000/04/19 18:52:52  ivan
 *converted address fields to unsigned long and added fields for physical
 *addresses on cyclades_card structure;
 *
 *Revision 3.0  1998/11/02 14:20:59  ivan
 *added nports field on cyclades_card structure;
 *
 *Revision 2.5  1998/08/03 16:57:01  ivan
 *added cyclades_idle_stats structure;
 * 
 *Revision 2.4  1998/06/01 12:09:53  ivan
 *removed closing_wait2 from cyclades_port structure;
 *
 *Revision 2.3  1998/03/16 18:01:12  ivan
 *changes in the cyclades_port structure to get it closer to the 
 *standard serial port structure;
 *added constants for new ioctls;
 *
 *Revision 2.2  1998/02/17 16:50:00  ivan
 *changes in the cyclades_port structure (addition of shutdown_wait and 
 *chip_rev variables);
 *added constants for new ioctls and for CD1400 rev. numbers.
 *
 *Revision 2.1	1997/10/24 16:03:00  ivan
 *added rflow (which allows enabling the CD1400 special flow control 
 *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to 
 *cyclades_port structure;
 *added Alpha support
 *
 *Revision 2.0  1997/06/30 10:30:00  ivan
 *added some new doorbell command constants related to IOCTLW and
 *UART error signaling
 *
 *Revision 1.8  1997/06/03 15:30:00  ivan
 *added constant ZFIRM_HLT
 *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin)
 *
 *Revision 1.7  1997/03/26 10:30:00  daniel
 *new entries at the end of cyclades_port struct to reallocate
 *variables illegally allocated within card memory.
 *
 *Revision 1.6  1996/09/09 18:35:30  bentson
 *fold in changes for Cyclom-Z -- including structures for
 *communicating with board as well modest changes to original
 *structures to support new features.
 *
 *Revision 1.5  1995/11/13 21:13:31  bentson
 *changes suggested by Michael Chastain <mec@duracef.shout.net>
 *to support use of this file in non-kernel applications
 *
 *
 */

#ifndef _LINUX_CYCLADES_H
#define _LINUX_CYCLADES_H

#include <linux/types.h>

struct cyclades_monitor {
        unsigned long           int_count;
        unsigned long           char_count;
        unsigned long           char_max;
        unsigned long           char_last;
};

/*
 * These stats all reflect activity since the device was last initialized.
 * (i.e., since the port was opened with no other processes already having it
 * open)
 */
struct cyclades_idle_stats {
    __kernel_time_t in_use;	/* Time device has been in use (secs) */
    __kernel_time_t recv_idle;	/* Time since last char received (secs) */
    __kernel_time_t xmit_idle;	/* Time since last char transmitted (secs) */
    unsigned long  recv_bytes;	/* Bytes received */
    unsigned long  xmit_bytes;	/* Bytes transmitted */
    unsigned long  overruns;	/* Input overruns */
    unsigned long  frame_errs;	/* Input framing errors */
    unsigned long  parity_errs;	/* Input parity errors */
};

#define CYCLADES_MAGIC  0x4359

#define CYGETMON                0x435901
#define CYGETTHRESH             0x435902
#define CYSETTHRESH             0x435903
#define CYGETDEFTHRESH          0x435904
#define CYSETDEFTHRESH          0x435905
#define CYGETTIMEOUT            0x435906
#define CYSETTIMEOUT            0x435907
#define CYGETDEFTIMEOUT         0x435908
#define CYSETDEFTIMEOUT         0x435909
#define CYSETRFLOW		0x43590a
#define CYGETRFLOW		0x43590b
#define CYSETRTSDTR_INV		0x43590c
#define CYGETRTSDTR_INV		0x43590d
#define CYZSETPOLLCYCLE		0x43590e
#define CYZGETPOLLCYCLE		0x43590f
#define CYGETCD1400VER		0x435910
#define	CYSETWAIT		0x435912
#define	CYGETWAIT		0x435913

/*************** CYCLOM-Z ADDITIONS ***************/

#define CZ_DEF_POLL	(HZ/25)

#define MAX_BOARD       4       /* Max number of boards */
#define MAX_DEV         256     /* Max number of ports total */
#define	CYZ_MAX_SPEED	921600

#define	CYZ_FIFO_SIZE	16

#define CYZ_BOOT_NWORDS 0x100
struct CYZ_BOOT_CTRL {
        unsigned short  nboard;
        int             status[MAX_BOARD];
        int             nchannel[MAX_BOARD];
        int             fw_rev[MAX_BOARD];
        unsigned long   offset;
        unsigned long   data[CYZ_BOOT_NWORDS];
};

#ifndef DP_WINDOW_SIZE
/*
 *	Memory Window Sizes
 */

#define	DP_WINDOW_SIZE		(0x00080000)	/* window size 512 Kb */
#define	ZE_DP_WINDOW_SIZE	(0x00100000)	/* window size 1 Mb (Ze and
						  8Zo V.2 */
#define	CTRL_WINDOW_SIZE	(0x00000080)	/* runtime regs 128 bytes */

/*
 *	CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
 *	normally will access only interested on the fpga_id, fpga_version,
 *	start_cpu and stop_cpu.
 */

struct	CUSTOM_REG {
	__u32	fpga_id;		/* FPGA Identification Register */
	__u32	fpga_version;		/* FPGA Version Number Register */
	__u32	cpu_start;		/* CPU start Register (write) */
	__u32	cpu_stop;		/* CPU stop Register (write) */
	__u32	misc_reg;		/* Miscellaneous Register */
	__u32	idt_mode;		/* IDT mode Register */
	__u32	uart_irq_status;	/* UART IRQ status Register */
	__u32	clear_timer0_irq;	/* Clear timer interrupt Register */
	__u32	clear_timer1_irq;	/* Clear timer interrupt Register */
	__u32	clear_timer2_irq;	/* Clear timer interrupt Register */
	__u32	test_register;		/* Test Register */
	__u32	test_count;		/* Test Count Register */
	__u32	timer_select;		/* Timer select register */
	__u32	pr_uart_irq_status;	/* Prioritized UART IRQ stat Reg */
	__u32	ram_wait_state;		/* RAM wait-state Register */
	__u32	uart_wait_state;	/* UART wait-state Register */
	__u32	timer_wait_state;	/* timer wait-state Register */
	__u32	ack_wait_state;		/* ACK wait State Register */
};

/*
 *	RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
 *	registers. This structure can be used to access the 9060 registers
 *	(memory mapped).
 */

struct RUNTIME_9060 {
	__u32	loc_addr_range;	/* 00h - Local Address Range */
	__u32	loc_addr_base;	/* 04h - Local Address Base */
	__u32	loc_arbitr;	/* 08h - Local Arbitration */
	__u32	endian_descr;	/* 0Ch - Big/Little Endian Descriptor */
	__u32	loc_rom_range;	/* 10h - Local ROM Range */
	__u32	loc_rom_base;	/* 14h - Local ROM Base */
	__u32	loc_bus_descr;	/* 18h - Local Bus descriptor */
	__u32	loc_range_mst;	/* 1Ch - Local Range for Master to PCI */
	__u32	loc_base_mst;	/* 20h - Local Base for Master PCI */
	__u32	loc_range_io;	/* 24h - Local Range for Master IO */
	__u32	pci_base_mst;	/* 28h - PCI Base for Master PCI */
	__u32	pci_conf_io;	/* 2Ch - PCI configuration for Master IO */
	__u32	filler1;	/* 30h */
	__u32	filler2;	/* 34h */
	__u32	filler3;	/* 38h */
	__u32	filler4;	/* 3Ch */
	__u32	mail_box_0;	/* 40h - Mail Box 0 */
	__u32	mail_box_1;	/* 44h - Mail Box 1 */
	__u32	mail_box_2;	/* 48h - Mail Box 2 */
	__u32	mail_box_3;	/* 4Ch - Mail Box 3 */
	__u32	filler5;	/* 50h */
	__u32	filler6;	/* 54h */
	__u32	filler7;	/* 58h */
	__u32	filler8;	/* 5Ch */
	__u32	pci_doorbell;	/* 60h - PCI to Local Doorbell */
	__u32	loc_doorbell;	/* 64h - Local to PCI Doorbell */
	__u32	intr_ctrl_stat;	/* 68h - Interrupt Control/Status */
	__u32	init_ctrl;	/* 6Ch - EEPROM control, Init Control, etc */
};

/* Values for the Local Base Address re-map register */

#define	WIN_RAM		0x00000001L	/* set the sliding window to RAM */
#define	WIN_CREG	0x14000001L	/* set the window to custom Registers */

/* Values timer select registers */

#define	TIMER_BY_1M	0x00		/* clock divided by 1M */
#define	TIMER_BY_256K	0x01		/* clock divided by 256k */
#define	TIMER_BY_128K	0x02		/* clock divided by 128k */
#define	TIMER_BY_32K	0x03		/* clock divided by 32k */

/****************** ****************** *******************/
#endif

#ifndef ZFIRM_ID
/* #include "zfwint.h" */
/****************** ****************** *******************/
/*
 *	This file contains the definitions for interfacing with the
 *	Cyclom-Z ZFIRM Firmware.
 */

/* General Constant definitions */

#define	MAX_CHAN	64		/* max number of channels per board */

/* firmware id structure (set after boot) */

#define ID_ADDRESS	0x00000180L	/* signature/pointer address */
#define	ZFIRM_ID	0x5557465AL	/* ZFIRM/U signature */
#define	ZFIRM_HLT	0x59505B5CL	/* ZFIRM needs external power supply */
#define	ZFIRM_RST	0x56040674L	/* RST signal (due to FW reset) */

#define	ZF_TINACT_DEF	1000		/* default inactivity timeout 
					   (1000 ms) */
#define	ZF_TINACT	ZF_TINACT_DEF

struct	FIRM_ID {
	__u32	signature;		/* ZFIRM/U signature */
	__u32	zfwctrl_addr;		/* pointer to ZFW_CTRL structure */
};

/* Op. System id */

#define	C_OS_LINUX	0x00000030	/* generic Linux system */

/* channel op_mode */

#define	C_CH_DISABLE	0x00000000	/* channel is disabled */
#define	C_CH_TXENABLE	0x00000001	/* channel Tx enabled */
#define	C_CH_RXENABLE	0x00000002	/* channel Rx enabled */
#define	C_CH_ENABLE	0x00000003	/* channel Tx/Rx enabled */
#define	C_CH_LOOPBACK	0x00000004	/* Loopback mode */

/* comm_parity - parity */

#define	C_PR_NONE	0x00000000	/* None */
#define	C_PR_ODD	0x00000001	/* Odd */
#define C_PR_EVEN	0x00000002	/* Even */
#define C_PR_MARK	0x00000004	/* Mark */
#define C_PR_SPACE	0x00000008	/* Space */
#define C_PR_PARITY	0x000000ff

#define	C_PR_DISCARD	0x00000100	/* discard char with frame/par error */
#define C_PR_IGNORE	0x00000200	/* ignore frame/par error */

/* comm_data_l - data length and stop bits */

#define C_DL_CS5	0x00000001
#define C_DL_CS6	0x00000002
#define C_DL_CS7	0x00000004
#define C_DL_CS8	0x00000008
#define	C_DL_CS		0x0000000f
#define C_DL_1STOP	0x00000010
#define C_DL_15STOP	0x00000020
#define C_DL_2STOP	0x00000040
#define	C_DL_STOP	0x000000f0

/* interrupt enabling/status */

#define	C_IN_DISABLE	0x00000000	/* zero, disable interrupts */
#define	C_IN_TXBEMPTY	0x00000001	/* tx buffer empty */
#define	C_IN_TXLOWWM	0x00000002	/* tx buffer below LWM */
#define	C_IN_RXHIWM	0x00000010	/* rx buffer above HWM */
#define	C_IN_RXNNDT	0x00000020	/* rx no new data timeout */
#define	C_IN_MDCD	0x00000100	/* modem DCD change */
#define	C_IN_MDSR	0x00000200	/* modem DSR change */
#define	C_IN_MRI	0x00000400	/* modem RI change */
#define	C_IN_MCTS	0x00000800	/* modem CTS change */
#define	C_IN_RXBRK	0x00001000	/* Break received */
#define	C_IN_PR_ERROR	0x00002000	/* parity error */
#define	C_IN_FR_ERROR	0x00004000	/* frame error */
#define C_IN_OVR_ERROR  0x00008000      /* overrun error */
#define C_IN_RXOFL	0x00010000      /* RX buffer overflow */
#define C_IN_IOCTLW	0x00020000      /* I/O control w/ wait */
#define C_IN_MRTS	0x00040000	/* modem RTS drop */
#define C_IN_ICHAR	0x00080000
 
/* flow control */

#define	C_FL_OXX	0x00000001	/* output Xon/Xoff flow control */
#define	C_FL_IXX	0x00000002	/* output Xon/Xoff flow control */
#define C_FL_OIXANY	0x00000004	/* output Xon/Xoff (any xon) */
#define	C_FL_SWFLOW	0x0000000f

/* flow status */

#define	C_FS_TXIDLE	0x00000000	/* no Tx data in the buffer or UART */
#define	C_FS_SENDING	0x00000001	/* UART is sending data */
#define	C_FS_SWFLOW	0x00000002	/* Tx is stopped by received Xoff */

/* rs_control/rs_status RS-232 signals */

#define C_RS_PARAM	0x80000000	/* Indicates presence of parameter in 
					   IOCTLM command */
#define	C_RS_RTS	0x00000001	/* RTS */
#define	C_RS_DTR	0x00000004	/* DTR */
#define	C_RS_DCD	0x00000100	/* CD */
#define	C_RS_DSR	0x00000200	/* DSR */
#define	C_RS_RI		0x00000400	/* RI */
#define	C_RS_CTS	0x00000800	/* CTS */

/* commands Host <-> Board */

#define	C_CM_RESET	0x01		/* reset/flush buffers */
#define	C_CM_IOCTL	0x02		/* re-read CH_CTRL */
#define	C_CM_IOCTLW	0x03		/* re-read CH_CTRL, intr when done */
#define	C_CM_IOCTLM	0x04		/* RS-232 outputs change */
#define	C_CM_SENDXOFF	0x10		/* send Xoff */
#define	C_CM_SENDXON	0x11		/* send Xon */
#define C_CM_CLFLOW	0x12		/* Clear flow control (resume) */
#define	C_CM_SENDBRK	0x41		/* send break */
#define	C_CM_INTBACK	0x42		/* Interrupt back */
#define	C_CM_SET_BREAK	0x43		/* Tx break on */
#define	C_CM_CLR_BREAK	0x44		/* Tx break off */
#define	C_CM_CMD_DONE	0x45		/* Previous command done */
#define C_CM_INTBACK2	0x46		/* Alternate Interrupt back */
#define	C_CM_TINACT	0x51		/* set inactivity detection */
#define	C_CM_IRQ_ENBL	0x52		/* enable generation of interrupts */
#define	C_CM_IRQ_DSBL	0x53		/* disable generation of interrupts */
#define	C_CM_ACK_ENBL	0x54		/* enable acknowledged interrupt mode */
#define	C_CM_ACK_DSBL	0x55		/* disable acknowledged intr mode */
#define	C_CM_FLUSH_RX	0x56		/* flushes Rx buffer */
#define	C_CM_FLUSH_TX	0x57		/* flushes Tx buffer */
#define C_CM_Q_ENABLE	0x58		/* enables queue access from the 
					   driver */
#define C_CM_Q_DISABLE  0x59            /* disables queue access from the 
					   driver */

#define	C_CM_TXBEMPTY	0x60		/* Tx buffer is empty */
#define	C_CM_TXLOWWM	0x61		/* Tx buffer low water mark */
#define	C_CM_RXHIWM	0x62		/* Rx buffer high water mark */
#define	C_CM_RXNNDT	0x63		/* rx no new data timeout */
#define	C_CM_TXFEMPTY	0x64
#define	C_CM_ICHAR	0x65
#define	C_CM_MDCD	0x70		/* modem DCD change */
#define	C_CM_MDSR	0x71		/* modem DSR change */
#define	C_CM_MRI	0x72		/* modem RI change */
#define	C_CM_MCTS	0x73		/* modem CTS change */
#define C_CM_MRTS	0x74		/* modem RTS drop */
#define	C_CM_RXBRK	0x84		/* Break received */
#define	C_CM_PR_ERROR	0x85		/* Parity error */
#define	C_CM_FR_ERROR	0x86		/* Frame error */
#define C_CM_OVR_ERROR  0x87            /* Overrun error */
#define C_CM_RXOFL	0x88            /* RX buffer overflow */
#define	C_CM_CMDERROR	0x90		/* command error */
#define	C_CM_FATAL	0x91		/* fatal error */
#define	C_CM_HW_RESET	0x92		/* reset board */

/*
 *	CH_CTRL - This per port structure contains all parameters
 *	that control an specific port. It can be seen as the
 *	configuration registers of a "super-serial-controller".
 */

struct CH_CTRL {
	__u32	op_mode;	/* operation mode */
	__u32	intr_enable;	/* interrupt masking */
	__u32	sw_flow;	/* SW flow control */
	__u32	flow_status;	/* output flow status */
	__u32	comm_baud;	/* baud rate  - numerically specified */
	__u32	comm_parity;	/* parity */
	__u32	comm_data_l;	/* data length/stop */
	__u32	comm_flags;	/* other flags */
	__u32	hw_flow;	/* HW flow control */
	__u32	rs_control;	/* RS-232 outputs */
	__u32	rs_status;	/* RS-232 inputs */
	__u32	flow_xon;	/* xon char */
	__u32	flow_xoff;	/* xoff char */
	__u32	hw_overflow;	/* hw overflow counter */
	__u32	sw_overflow;	/* sw overflow counter */
	__u32	comm_error;	/* frame/parity error counter */
	__u32 ichar;
	__u32 filler[7];
};

/*
 *	BUF_CTRL - This per channel structure contains
 *	all Tx and Rx buffer control for a given channel.
 */

struct	BUF_CTRL	{
	__u32	flag_dma;	/* buffers are in Host memory */
	__u32	tx_bufaddr;	/* address of the tx buffer */
	__u32	tx_bufsize;	/* tx buffer size */
	__u32	tx_threshold;	/* tx low water mark */
	__u32	tx_get;		/* tail index tx buf */
	__u32	tx_put;		/* head index tx buf */
	__u32	rx_bufaddr;	/* address of the rx buffer */
	__u32	rx_bufsize;	/* rx buffer size */
	__u32	rx_threshold;	/* rx high water mark */
	__u32	rx_get;		/* tail index rx buf */
	__u32	rx_put;		/* head index rx buf */
	__u32	filler[5];	/* filler to align structures */
};

/*
 *	BOARD_CTRL - This per board structure contains all global 
 *	control fields related to the board.
 */

struct BOARD_CTRL {

/* static info provided by the on-board CPU */
	__u32	n_channel;	/* number of channels */
	__u32	fw_version;	/* firmware version */

/* static info provided by the driver */
	__u32	op_system;	/* op_system id */
	__u32	dr_version;	/* driver version */

/* board control area */
	__u32	inactivity;	/* inactivity control */

/* host to FW commands */
	__u32	hcmd_channel;	/* channel number */
	__u32	hcmd_param;	/* pointer to parameters */

/* FW to Host commands */
	__u32	fwcmd_channel;	/* channel number */
	__u32	fwcmd_param;	/* pointer to parameters */
	__u32	zf_int_queue_addr; /* offset for INT_QUEUE structure */

/* filler so the structures are aligned */
	__u32	filler[6];
};

/* Host Interrupt Queue */

#define QUEUE_SIZE	(10*MAX_CHAN)

struct	INT_QUEUE {
	unsigned char	intr_code[QUEUE_SIZE];
	unsigned long	channel[QUEUE_SIZE];
	unsigned long	param[QUEUE_SIZE];
	unsigned long	put;
	unsigned long	get;
};

/*
 *	ZFW_CTRL - This is the data structure that includes all other
 *	data structures used by the Firmware.
 */
 
struct ZFW_CTRL {
	struct BOARD_CTRL	board_ctrl;
	struct CH_CTRL		ch_ctrl[MAX_CHAN];
	struct BUF_CTRL		buf_ctrl[MAX_CHAN];
};

/****************** ****************** *******************/
#endif

#endif /* _LINUX_CYCLADES_H */

X7ROOT File Manager

Editing: cyclades.h

Upload File

Create Folder